With the development of society, people living standard improving, household decoration level and taste are concerned. People are paying more and more attention to decoration materials, construction quality and furniture selection. There is a leakage protector on the circuit and a gas protection valve on the gas, which makes household electricity and gas use safer, but the problem of water leakage has not been completely solved.

There are many hidden dangers of water leakage in the domestic water supply system. Once the water leaks, not only the pipes are damaged, but also the floor, walls, furniture and decorations are soaked, causing huge economic losses. If the water leakage brings disaster to downstairs residents or elevator shafts , The loss is even more incalculable.

Overflowing water ruined the decoration

Since 2016, Runlucky has successively configured intelligent anti-leakage functions on the whole house water filter and softener products such as disk prefilters, whole house water filters, residential softeners, shower softeners, etc.,. It is by setting the continuous water supplying time, peak flow rate and external leakage sensor. These triple intelligent leak-proof designs effectively solves the problems of small leakage, dripping and large leakage of domestic water, which eliminates water leakage accidents in the embryonic stage, and protect domestic water safety.

Some products with intelligent anti-leakage functions

Now, Runlucky has launched a self-developed new water leakage protection device—wireless auto shut-off valve, which consists of a main control valve (ceramic hard sealing electric ball valve), a wireless receiving controller and a wireless water immersion detector.

The principle: place the wireless water immersion detector in a place where it is easy to touch the water. When the probe of the wireless water immersion detector contacts water, it will send a signal to the main control valve, and the main control valve will quickly close and cut off the water source when the signal is received.

◎ The main control valve F104E adopts a light-torque ceramic core ball valve, which is easy to open and close, with small flow resistance and reliable sealing.

◎ The wireless water immersion detector F104F adopts a waterproof design, can be wirelessly arranged, monitor water leakage at multiple points, remote sensing, simple to use, and protect the safety of domestic water 24 -hour.

Automatic water cut and sensitive protection

The main control valve is installed on the main pipe of the water inlet, and the wireless water immersion detector can be placed in the kitchen, bathroom, equipment room, balcony and other low-lying areas with water due to water leakage.

When there is a water leak in the home and the water on the ground overflows the wireless water immersion detector probe, the indicator light of the wireless detector flashes (maximum 10 seconds), the main control valve receives the signal and quickly switches the ball valve to the closed state to avoid further water leakage causing losses. Subsequently, the indicator light of the wireless water immersion detector flashed rapidly, and the buzzer continued to alarm, prompting to solve the water leakage problem.

After the water leakage problem is solved, the users need to clean and dry the wireless water immersion detector，then press and hold the "Switch/Select" button on the main control valve to switch the main control valve to the open state, the green light "On" is always on, the buzzer alarm is released, and continue to monitor the hidden dangers of water leakage in the whole house.

Wireless multi-point monitoring

The wireless water immersion detector transmits signals wirelessly, and the signal can be transmitted smoothly and remotely sensed except for the space isolated from signals such as heavy load-bearing walls, enclosed metal spaces, and strong magnetic interference occasions.

The main control valve supports up to 5 pieces of wireless water immersion detectors into the network (the factory standard is with 1 piece), which can monitor the hidden water leakage points in the whole house.

Long battery life, always guarding

The main control valve has a built-in large-capacity rechargeable lithium battery. After the battery is fully charged, it can last for 24 hours in the event of a power failure. The wireless water immersion detector is powered by a 12V/23A dry battery and has a battery life of up to 420 days.

※Lithium batteries have a certain life cycle for charging and discharging. It is recommended to replace them every 2 years; the 420-day battery life data is the result of laboratory test calculations. Environmental factors such as temperature and humidity in the use place will affect the battery life. It is recommended to replace it once a year.

12V/23A dry battery, can be purchased in the online store

When the power of the wireless water immersion detector is low, the corresponding indicator on the main control valve flashes slowly, and the buzzer alarms to remind the user to replace the battery. After the battery is replaced, the alarm is cleared.

Small size and reliable quality

The main control valve adopts a ceramic hard sealing ball valve, the torque is only 1/10 of the traditional ball valve, it is easy to open and close, and it hardly affects the water pressure. It has been tested by the National Valve Quality Supervision and Inspection Center (Zhejiang), 1 million times of opening and closing without leakage, reliable sealing; the valve body is made of high-quality brass, and the water inlet and outlet are respectively connected by G3/4 threaded connection and animated nut, which is convenient to install.

The water immersion detector is small in size and can be placed in the corners of leaking points such as kitchens, bathrooms, balconies, etc. It does not take up any space at all. The white appearance of the whole body can be well integrated into the home decoration.

Simple interface and simple operation

The main control valve operation interface is simple and easy to understand, and it is easy to match with the detector.

The matching is completed by default at the factory, and the user only needs to test whether the matching is valid before installation and use: by connecting the positive and negative probes of the wireless detector, the detector indicator flashes, and check whether there is a buzzer alarm on the main control valve. If there is and the corresponding indicator flashes, the matching is valid; if it is invalid, you need to re- match.

Re- matching method

Runlucky wireless auto shut-off valve

Now available

Welcome to inquire 0578-2969318